[Reply from: Reply from: Lynn CoatsParticipant]

I don’t know if my other post went through and I apologize if this is a repeat performance. I have a two whole oval button. Success story to share. Try saying that one fast. Oh, I didn’t know what to do with all of the two whole oval buttons that I had. Because I wasn’t going to sell them in to close. Enter a 2 x 3“ flash card, pre-punched, rubber bands, and rubber cement. I took the two whole oval buttons, I took the little flash card. I looped a rubber band through the pre-punch hole in the corner, then I took rubber cement and put a little on the card. Then I placed the button on the card and allowed it to dry. Then I recorded , my way tags. Can I let’s say batch scan way tags for the same product without recording each time? Or is that only accomplished with the way length. That’s my next purchase. I’m hooked on these things. I could sell these things.

; September 6, 2023 at 10:15 am

[Reply from: Reply from: Lynn CoatsParticipant]

I have the oval hole buttons. I have actually two kind of silicone bands. I have the smaller ones which are about the standard diameter of a rubber band, and then I got some bigger ones that are wider. Now, I might do some crafting, but I have no idea how to get those silicone bands through the hole of the button. I know that according to your email, the pipe cleaners are useful for the two hole, buttons. And even then, I’m not sure how you would attach the buttons with the pipe cleaner to the object in the freezer. I’m not very bright in this department. So if I could get some direction on how to get those silicone bands through that little tiny hole, and how to attach the pipe cleaner through, I guess both holes and then how to attach it to the different products in the freezer, I can be on my way labeling again. Thanks.

; March 24, 2023 at 4:37 pm

[Reply from: Reply from: Lynn CoatsParticipant]

It’s me again. I promise, no more questions after this. Are the clips the same type and design as a chip clip? I’m trying to decide what would be the most efficient and take up as little room as possible in my pantry. I don’t have a lot of space to work with. Now that I have written this, I am thinking that the stickers might be a better way to go. Because I’m not sure if the clips stick up or stick out from the can. Thanks

; January 31, 2023 at 7:28 am

[Reply from: Reply from: Lynn CoatsParticipant]

I am so sorry to be asking so many questions on different topics. But I want to make sure I do this right. If I attach one of the magnets to a piece of card stock and loop, it around the metal can with an elastic band, will the tag still be able to be read by my phone? I guess what I’m getting at is no matter how you attach it, the magnets or metal cans should always be used with magnets. Thank you so much for all of your help.

; January 31, 2023 at 7:25 am

[Reply from: Reply from: Lynn CoatsParticipant]

I apologize if this question has been asked before. But I see there are two different kinds of buttons, the round button and the oval button. Are both of those freezer safe? I am so glad I thought of using this product to help me organize my life. This is such a brilliant idea.

; January 31, 2023 at 7:20 am

[Reply from: Reply from: Lynn CoatsParticipant]

I am organizing my pantry. And I want to reuse the stickers that I place on different items. Can you recommend a type of card or some thing that I could place the sticker on and then wrap it around the certain item with a rubber band or a silicone band? I’m also, looking for the same option for the buttons and as I have said, need something that can be removed to place in my grocery list basket.

; January 29, 2023 at 3:00 pm

[Reply from: Reply from: Lynn CoatsParticipant]

I hope I’m in the right thread. I just read that the oval hole buttons are what can be used in the freezer. Great! I need to order some of those. What type of elastic besides a rubber band holds up well in the freezer and refrigerator? I love this thing. I wish I had ordered these tags sooner.

; January 10, 2023 at 10:14 am

[Reply from: Reply from: Lynn CoatsParticipant]

I just got my tags a few days ago. So I am very, very new to all of this. I got some of the round tags which I believe are the magnets but I’m not sure. It says it works on metal. What I want to know is, has anyone found a way to let’s say, put the magnet on to Will say a piece of card stock and then rubber band it around the can so you can reuse the tags when you’re done with that cam. Thank you.

; January 10, 2023 at 10:10 am

[Author]

Replies